5 or 20kg
Small S Model
Our smallest Residential Dumbwaiter, with a car size of 250mm wide x 310mm deep x 500mm high and either 5 or 20 Kg capacity. It is designed to fit into the smallest space of 540 x 420. The motor is at the bottom of the shaft, so it is perfect when the top floor headroom is less than 2000mm. Originally designed and used as a document lift, this models' reliability has been well proven over the years and now due to rising demand for dumbwaiters inside the home, it is proving very popular when available space is at a bare minimum.
20kg
Small L Model
This Residential Dumbwaiter has a car size of 350mm wide x 500mm deep x 500mm high and 20 Kg capacity. It is designed to fit into a space of 640mm x 610mm. For use when the top floor headroom is less than the 2200mm needed for the standard motor at the top models. It has proven design quality and reliability and comes in primed painted finish for you to have painted to match your decor, galvanised or stainless steel, or a match of all. We would always recommend the standard motor at the top dumbwaiter, however, when space and limited headroom is at at a minimum, this is the perfect solution.
20-300kg
BKG 20kg to 300kg Dumbwaiter Lifts
German designed and manufactured, tailor made to your desired size and finish. Available from 2 to 30 floors, single, through or adjacent door entry, speeds from 0.2 to 1 meter per second. Complete with vertical bi-parting landing doors at waist serving height or at floor level, motor positioned can be at the top, bottom or side.
Car widths from 350mm to 1000mm, car depths from 320mm to 1000mm, car heights from 600mm to 1200mm. Complete with self supporting galvanised steel structure. Maximum travel of 120m . Supplied with either single or 3-phase drives, with car and landing door finishes in galvanised steel, zintec ( primed finish for self painting ) stainless steel, powder coated in any color or glass.
Options include: Roller shutter or stainless steel vertical bi-parting door for car entrance protection. Extra shelves. Car heated lifts. Motor room doors. 2 Hr fire rating. Full shaft steel cladding panels. Glass doors. Automatic doors. Intercoms. Tailor made with in 3/6 weeks ( depending on the model ) 20 Kg to 300 Kg.
50-100kg
400 Dumbwaiter Model
German designed and manufactured, available as front, front and rear or front and side door entry, complete with vertical bi-parting landing doors and self supporting galvanised steel structure. Maximum travel of 30m / 10 floors. 240 volt or 3-phase 400 volt supply. Car and landing finishes in primed painted for you to paint to match your décor, galvanised steel or stainless steel. We also offer glass doors and fully automatic doors.
Options include: Car roller shutter, extra shelves, car heated lift, motor room doors. Car Sizes: 400mm wide x 400mm deep x 80mm high. Automatic landing push buttons, car position indicator, lift in use indicator and door open signal, Lift arrival buzzers. Compliance with EC Machinery Regulations 2006/42/EC and EN81- 3:2000.
EC Machinery Regs 2006/42/EC and EN81-3:2000
50-100kg
Advantage S Model
German designed and manufactured, available as two or three stop, single, through or adjacent entry, complete with vertical bi-parting landing doors and self supporting galvanised steel structure. Maximum travel of 7m (two stop) or 10m (three stop) Supplied with either single or 3-phase drives, with car and landing finishes are stainless steel as standard, with landings having 2 hour fire rating.
Options include: Roller shutter or stainless steel vertical bi-parting door for car entrance protection. Extra shelves. Car heated lift. Motor room doors. In stock for installation within 1 to 2 weeks.
Car Size: Width 460mm X Depth 560mm X Height 800mm
Shaft Width 750mm X Shaft Depth 750mm
50-100kg
Advantage L Model
German designed and manufactured, available as two or three stop, single, through or adjacent entry, complete with vertical bi-parting landing doors and self supporting galvanised steel structure. Maximum travel of 7m (two stop) or 10m (three stop) Supplied with either single or 3-phase drives, with car and landing finishes are stainless steel as standard, with landings having 2 hour fire rating.
Options include: Roller shutter or stainless steel vertical bi-parting door for car entrance protection. Extra shelves. Car heated lift. Motor room doors. In stock for installation within 1 to 2 weeks.
Car Size: Width 710mm X Depth 820mm X Height 800mm
Shaft Width 1000mm X Shaft Depth 1000mm
50kg & 100kg
BKG Advantage S Stock Dumbwaiter
German designed and manufactured, available as two or three stop, single, through or adjacent entry, complete with vertical bi-parting landing doors and self supporting galvanised steel structure. Maximum travel of 7m (two stop) or 10m (three stop) Supplied with either single or 3-phase drives, with car and landing finishes are stainless steel as standard, with landings having 2 hour fire rating.
Options include: Roller shutter or stainless steel vertical bi-parting door for car entrance protection. Extra shelves. Car heated lift. Motor room doors. In stock for installation within 1 to 2 weeks. Car Size: Width 460mm X Depth 560mm X Height 800mm Shaft Width 750mm X Shaft Depth 750mm
Car Size: Width 460mm X Depth 560mm X Height 800mm
Shaft Width 750mm X Shaft Depth 750mm
50kg & 100kg
BKG Advantage L Stock Dumbwaiter
German designed and manufactured, available as two or three stop, single, through or adjacent entry, complete with vertical bi-parting landing doors and self supporting galvanised steel structure. Maximum travel of 7m (two stop) or 10m (three stop) Supplied with either single or 3-phase drives, with car and landing finishes are stainless steel as standard, with landings having 2 hour fire rating. Options include: Roller shutter or stainless steel vertical bi-parting door for car entrance protection. Extra shelves. Car heated lift. Motor room doors. In stock for installation within 1 to 2 weeks. Car Size: Width 460mm X Depth 560mm X Height 800mm Shaft Width 750mm X Shaft Depth 750mm
Car Size: Width 710mm X Depth 820mm X Height 800mm
Shaft Width 1000mm X Shaft Depth 1000mm
Low Headroom Dumbwaiter
When the headroom of the top floor is insufficient to accommodate a standard top motor drive lift, this Low Headroom Dumbwaiter is the answer. The motor is situated inside the lift structure on the bottom floor so the headroom needed at the top floor can be as little as 1200mm. It comes complete with its own motor room access door that is located under the bottom floor landing door frame. Proven German design and build quality with lasting reliability this dumbwaiter needs minimal servicing and will give years of trouble-free service.
Under Bar Dumbwaiter
This specialised 100kg 2-stop low headroom dumbwaiter lift is ideal for bars, pubs and restaurants where the lift top door sits directly under the bar or counter or when there is low headroom at the top floor. It has a waist height bi-parting door at the bottom floor, but turns into a hinged door model at the top floor. The top floor door can sit on the floor when used under a counter, or can be at waist height for normal dumbwaiter purposes. It comes complete with its own motor room access door that is located under the bottom floor landing door frame. Second-to-none reliability, minimal servicing, trouble-free service and German quality are just a few of this model's credentials.
50kg
Micro Lift 50A
The Micro Lift 50A will fit into smaller spaces when space is at a premium for your dumb waiter installation. Usually fitted into small commercial kitchens or sometimes in the home environment, the 50A model packs a significant punch for its relative small size.
It can carry up to 50kg in weight and is finished in either enamel or stainless steel.
With a number of available add-ons it makes it perfect for the home or domestic dumbwaiter lift market, well sized to fit into an old cupboard space or chimney breast, the microlift 50A can be installed in only two days. This model can sometimes be called a small service lift and by its nature comes under the category of other bespoke dumbwaiter lifts.
50kg
Micro Lift 50B
This lift is supplied as standard at 50kg capacity and is perfectly suited for restaurants, pubs, cafés, offices and private homes.
This model is supplied with a 520mm by 520mm cabin which allows for plates, drinks, documents and any other small items to be transported with a dumbwaiter lift. This dumb waiter lift is often described as a “food lift” or small service lift because of the excellent service it provides on a daily basis.
Our dumbwaiter lifts are well suited for moving small loads of 50kg or 100kg in many different situations. This can be either a stainless steel dumbwaiter or an enamel dumbwaiter lift.
50kg
Micro Lift 50C
The Micro Lift 50C is the next size up to the 50B model. This lift is supplied as standard at 50kg capacity and is also very regularly specified for use in restaurants, public houses, coffee shops, department stores and bed and breakfasts.
This model is supplied with a 620mm by 620mm cabin which allows for larger plates, large bottles, trays of food and any other items to be transported with a dumbwaiter lift. This dumbwaiter is sometimes described as food hoist or restaurant lift because of larger cabin space it allows.
Our dumb waiter lifts are specifically designed for transporting loads of 50kg or 100kg. This can be either a stainless steel dumbwaiter or an enamel dumbwaiter lift.
50kg
Micro Lift DD50
The Micro Lift DD50 is similar to the 50A model and will fit into much smaller spaces than other dumb waiter lifts within the 50kg capacity range.
Often discovered in a small bistro, café or in a private home the DD50 can offer a dumbwaiter solution with minimal lift shaft space available. It can carry up to 50kg in weight and is finished in either enamel or stainless steel.
As with other dummy waiters of this type, it can be supplied with items such as intercoms and extra shelves to increase the amount of items that can be transported per lift journey.
Our Micro Lift DD50 can be installed in two days by experienced lift engineers. This model can sometimes be called a private home dumbwaiter or small dumbwaiter and similar to the 50A model falls under the category of bespoke dumbwaiter lifts.
100kg
Micro Lift 100A – with hinged doors
The Micro Lift 100A with hinged doors is the same model of dumb waiter service lift as the normal 100A however, it has hinged doors instead of bi-parting shutter doors. Unlike the standard 100A model, this model is on a lead time due to its bespoke lift nature.
Often seen in large kitchens or industrial premises, this dumb waiter is a highly efficient machine when you require fast efficient transport for items such as bottles of beer, wine, packaged goods, car parts etc.
The uses are endless for this fantastic model of dumbwaiter lift and the additional space and capacity make it an excellent choice all round. This can be either a stainless steel dumbwaiter or an enamel dumbwaiter lift.
100kg
Micro Lift 100A – with rise and fall shutters
The Micro Lift 100A is one the largest dumb waiter service lifts we provide, and is available in stock. With a larger cabin than other models which are designed for food lift purposes, the 100kg model also known as the Microlift 100A has double the capacity of a normal dumb waiter and a large inside cabin space for moving bulky items up to 100kg in weight.
Often seen in large kitchens or industrial premises, this dumb waiter is a highly efficient machine when you require fast efficient transport for items such as bottles of beer, wine, packaged goods, car parts etc. The uses are endless for this fantastic model of dumbwaiter lift and the additional space and capacity make it an excellent choice all round.
This can be either a stainless steel dumbwaiter or an enamel dumbwaiter lift.
UK Supplier